What are the commonly used grades and uses of titanium alloys?

What are the commonly used grades and uses of titanium alloys?

1. Basic concept of titanium alloys
Titanium alloy refers to an alloy formed by titanium and other elements, which has the characteristics of low density, high strength, good heat resistance, corrosion resistance and wear resistance. Therefore, it has a wide range of applications in aviation, aerospace, automobiles, ships, chemicals, medical and stage lighting.

Titanium alloy products

2. Commonly used titanium alloy grades and uses
Industrial pure titanium TA1, TA2, TA3: excellent stamping performance. Various forms of welding can be performed, with good welding performance, and the welded joint can reach 90% of the strength of the matrix. Easy to saw and grind, good machining performance. Excellent corrosion resistance is used for parts below 350℃, with small stress and parts stamped into various complex shapes. Such as thermal power station condensers; marine seawater corrosion pipeline systems, valves, pumps; chemical heat exchangers, pump bodies, distillation towers; seawater desalination systems, platinum-plated anodes; aircraft skeletons, skins, engine parts, beams, etc.

 

Titanium alloy TA6:
It has good welding performance and high creep strength, but low process plasticity. It can be deformed in hot state. Dongri alloy is not sensitive to cut when bearing axial load. The cutting performance is good. Parts and welded parts working below 400℃.

 

Titanium alloy TA7:
Poor stamping performance, good thermoplasticity. Dongri can be welded in various forms with good performance. The strength and plasticity of welded joints can be equal to those of base metal. The machining performance is the same as that of industrial pure titanium. Good corrosion resistance and high temperature thermal stability. It can be used as structural parts working for a long time below 500℃ and various die forgings.

 

Titanium alloy TA8:
Good thermoplasticity. Dongri can be welded in various forms with good weldability. The machining performance is the same as that of industrial pure titanium. Good oxidation resistance. Parts working for a long time below 500℃. Dongri can manufacture engine compressor discs and blades.

 

Titanium alloy TC1:
Good stamping performance. Dongri can be welded in various forms with good weldability. Machinability is the same as industrial pure titanium. Good oxidation resistance for parts working below 400℃. Suitable for various plates, stamping and welding parts.

 

Titanium alloy TC2:
At 350℃, the endurance strength for 100h is above 400MPa, and hot processing has good plasticity. When heated to 350-400℃, it has no tendency to become brittle. Therefore, it can be used to weld parts working at high temperatures to make parts working below 500℃, welded parts, die forgings and bent parts, etc.

 

Titanium alloy TC3:
Poor stamping performance, good thermoplasticity. Various forms of welding can be performed, and the strength of the welded joint can reach 90% of the strength of the base metal. The machinability is good, and cemented carbide, large cutting amount, slow speed, and sufficient cooling are required. It has good corrosion resistance and thermal stability. It is one of the most widely used titanium alloys for parts that work for a long time below 400℃.

 

Titanium alloy TC4:
The material composition is Ti-6Al-4V, which belongs to the (a+b) type titanium alloy with good comprehensive mechanical properties. High specific strength. The strength of TC4 is sb=1.012MPa, the density is g=4.4*103, the specific strength is sb/g=23.5, while the specific strength of alloy steel is less than 18. Titanium alloy has low thermal conductivity. The thermal conductivity of titanium alloy is 1/5 of iron and 1/10 of aluminum. The thermal conductivity of TC4 is l=7.955W/m·K. Linear expansion coefficient = 7.89*10-6 ℃, specific heat = 0.612cal/g ·℃. The elastic modulus of titanium alloy is low. The elastic modulus of TC4 is E=110GPa, which is about 1/2 of that of steel, so titanium alloy is easy to deform during processing. TC4 (Ti-6Al-4V) and TA7 (Ti-5Al-2.5Sn) titanium alloys were surface modified by two injection schemes. The test showed that after ion injection, the titanium alloy had improved microhardness, significantly reduced sliding friction coefficient, and effectively improved wear resistance. In order to explore its modification mechanism, X-ray photoelectron spectroscopy (XPS) analysis was carried out on injected and non-injected samples, and satisfactory results were obtained. TC4 titanium alloy has a series of advantages such as excellent corrosion resistance, low density, high specific strength, good toughness and weldability, and has been successfully applied in aerospace, petrochemical, shipbuilding, automobile, mold, medicine and other departments.

Titanium alloy products

Titanium alloy TC5:
Stable below 350, and plasticity decreases at higher temperatures. Parts that can be deformed by forging, stamping, etc. in a hot state and work below 350℃.

 

Titanium alloy TC9:
Thermoplasticity is good. Machinability is the same as T alloy. High corrosion resistance. Good thermal stability. Parts that work for a long time below 400℃. Can be used to manufacture compressor disks and blades.

 

Titanium alloy TC10:
Poor stamping performance, good thermoplasticity. Dongri can perform various forms of welding, and the strength of the welded joint can reach 90% of the strength of the base metal. Machinability is the same as T alloy. Good corrosion resistance. Good thermal stability, significant heat treatment effect, good hardenability. Parts that work for a long time below 450℃.

 

This article introduces the commonly used titanium alloy grades and uses. As a new material, titanium alloy has broad development prospects in the future. I believe that with the continuous development of science and technology, the application field of titanium alloy will be more extensive.

 

You Might Also Like

Send Inquiry