Products

Home / Products/ Titanium Rod / Titanium Alloy Rod

Titanium Alloy Rod Grade5

Product name: titanium alloy rod grade5
Titanium content: 99.6%
Forged titanium rod:26-200mm
Extruded titanium rod: 15 - 80mm
Rolled titanium rod: 8 - 24mm
Type: a+β titanium alloy
The thermal conductivity of titanium is λ=15 24W/mK
Melting point:1672 °C

Send Inquiry

Product Introduction

Product Description:

Our titanium alloy rod grade 5 is ideal for applications requiring high strength, low weight and excellent corrosion resistance. It is also known as Ti-6Al-4V and is the most commonly used titanium alloy grade.

This titanium alloy material is ideal for use in the aerospace, marine and medical industries, as well as industrial and sports applications. It has a high strength-to-weight ratio, making it ideal for structural components such as airframe components, engine components and turbines. It also performs well in marine environments and resists corrosion from salt water.

Chemical analysis table:

Chemical composition of G.5
Trademark	Impurities are not greater than
GR5	Titanium (Ti)	Iron (Fe)	Carbon(C)	Nitrogen(N)	Hydrogen(H)	Oxygen(O)	Aluminum (Al)	Vanadium(V)
GR5	margin	≤0.30	≤0.10	≤0.05	≤0.015	≤0.20	5.5～6.75	3.5～4.5

Titanium alloy mechanical properties :

GR.5 titanium alloy mechanical properties
tensile strength	σb/MPa≥895
Specify residual elongation stress	σr0.2/MPa≥825
Elongation	δ5(%)≥10
rate of reduction in area	ψ(%)≥25
Ti-6Al-4V titanium alloy density: 4.5 (g/cm3)	Ti-6Al-4V working temperature -100～550 (℃)

Titanium alloy strength:After the solid solution strengthening treatment of the material, the strength does not increase much, only to 1100MPa, and the strength in the annealed state is 900MPa.

Thermal expansion coefficient: Titanium alloy has a series of advantages such as excellent corrosion resistance, small density, high specific strength, good toughness and weldability, etc.

It has been successfully used in aerospace, petrochemical, shipbuilding, automotive, pharmaceutical and other sectors.

Titanium alloy mechanical properties:Tensile strength ab/MPa2895, specified residual elongation stress σr0.2/MPA2825, elongation 65 (%) ≥ 10, section shrinkage Shrinkage ψ (%) 225

Titanium alloy density:4.5 (g/cm3) Working temperature-100~550 (9C)

Reason analysis: sitting for too long, heavy objects are pressed for a long time, pat the surface of the leather cloth with your hands and stretch on both sides

1.Titanium alloy rod grade5 product surface

①: Pickled surface, water-polished surface, shiny surface

②: The surface has no cracks, peeling, oxide scale, or folding traces of alkali washing.

2. Product section

①:Water cutting surface

②: Shearing machine cutting

③: Milling machine section

④: Laser sectioning

⑤: Line cutting surface

3. Product raw materials

All products are processed from superior titanium sponge ingots

Advantages of grade 5 titanium alloy rods

1. High strength: It has very high strength and hardness, making it tougher and more durable than standard titanium alloy materials.
2. Strong corrosion resistance: It has a strong ability to resist corrosion and damage from external surrounding materials and can be used for a long time under harsh conditions.
3. Good biocompatibility: It has good biocompatibility and will not cause rejection in the human body, so it is commonly used in clinical fields.
4. Good high temperature performance: It has good high temperature performance and can still maintain its original shape, mechanical and chemical properties under high temperature conditions.
5. Good processing performance: It has good processing performance and can be made into parts of various shapes and details through different processing techniques.

Disadvantages of Grade 5 Titanium Alloy Rods

1. Higher cost: Compared with general titanium alloy materials, the cost of grade five titanium alloy rods is higher.
2. Troublesome to transport: Due to its high strength and hardness, it is troublesome to process, requiring the use of high-precision processing equipment and exquisite processing technology.
3. Poor thermal conductivity: Its thermal conductivity is very poor and it is prone to overheating under high temperature conditions.

Process equipment：

The sales warehouse has large-scale laser cutting machines, sawing machines, CNC water cutting machines, CNC wire cutting machines, shearing machines and many other fixed-length cutting equipment.