Products

Home / Products/ Titanium Rod / Titanium Alloy Rod

Titanium Bar for Medical

Product: Medical Titanium Rod
Material: GR1, GR2, GR3, GR4, GR5 Ti6Al4V, GR20 Ti6Al7Nb, GR 23 Ti6Al4VELI
Specification: Rolled ￠8.0---40mm×L Forging￠40---150mm×L
Microstructure: The grain size of pure titanium is not less than grade 5, and the metallographic phase conforms to A1-A9
American Standard: ASTM B348 , AMS4928 , ASTM F67 , ASTM F1 26 or ASTM F136
status : Cold working (Y) Thermal processing (R) Annealing (M)
surface: Black leather surface, polished surface, polished surface (H11 H9 H8)

Send Inquiry

Product Introduction

We are a company specializing in the production of various high-quality titanium bar for medical and medical titanium alloy rods. Medical titanium rods are non-toxic, light in weight, high in strength, fatigue-resistant, corrosion-resistant and have excellent biocompatibility, which is very ideal Medical metal materials , which can be used as implants implanted in the human body , are widely used in the medical field . At present , the materials widely used in clinical practice are still mainly pure titanium and Ti-6Al-4V alloy . Titanium Bar For Medical is mainly used in various human surgical implants , such as joint and orthopedic implants, medical rod filters, dental implants Objects, artificial prostheses, fasteners, etc.

Mechanical behavior

Grade	state	diameter or side length	Tensile strength σb	Yield strength σ0.2	elongation after break	rate of reduction in area
Grade	state	mm	MPa	MPa	A%	Z%
GR 1	m	>7~90	≥240	≥170	≥24	≥30
GR 2	m		≥400	≥275	≥20	≥30
GR 3	m		≥500	≥380	≥18	≥30
GR4	M		≥580	≥485	≥15	≥25
GR5	M	>7~50	≥930	≥860	≥10	≥25
GR5	M	>50~90	≥895	≥830	≥10	≥25
GR23	M	>7~45	≥860	≥795	≥10	≥25
	M	>45~65	≥825	≥760	≥8	≥20
	m	>65~90	≥825	≥760	≥8	≥15
IMI367	m	>7~100	≥900	≥800	≥10	≥25
Note: For titanium rods with a diameter greater than 75mm, take the rod-oriented sample.

Chemical Composition:

Chemical composition

Our Existing Medical Titanium Rods:

Industrial pure titanium ( GR1 GR2 GR3 GR4 )

Ti-6Al-4V GR5 and Ti-6Al-4VELI GR23 alloys

Ti-6Al-7Nb ( GR2 0) alloy

Ti-Ni alloy (titanium nickel alloy)

New β-type titanium alloy

Product parameters

Product	Medical Titanium Rod
Material	GR1, GR2, GR3, GR4, GR5 Ti6Al4V, GR20 Ti6Al7Nb, GR 23 Ti6Al4VELI
Specification	Rolled ￠8.0---40mm×L Forging￠40---150mm×L
Microstructure	The grain size of pure titanium is not less than grade 5, and the metallographic phase conforms to A1-A9
American Standard	ASTM B348 , AMS4928 , ASTM F67 , ASTM F1 26 or ASTM F136
status	Cold working (Y) Thermal processing (R) Annealing (M)
surface	Black leather surface, polished surface, polished surface (H11 H9 H8)

Our titanium rods meet the following medical conditions:

Biocompatibility of materials and human body

The mechanical properties of the material are close to those of human bone

Corrosion resistance of materials in human environment

advantage

Has superior mechanical properties and fatigue resistance

Good corrosion resistance

Good toughness and low elastic modulus

Has good biocompatibility

Our products have a price that satisfies you

Application areas:

use titanium materials for airflow drying devices, heaters, screw feeders, pipelines, and cyclone separators in pharmaceutical equipment. On the one hand, the corrosion rate is only 0. 008-0. 003mm/a, the most It is important to ensure that the quality of the medicine will not be affected by the rust of the equipment.

Titanium has high strength, good biocompatibility, and low modulus. It has become a commonly used human bone substitute material in medical treatment, and titanium is used to manufacture hip joints, elbow joints, bone plates, bone screws, and knee joints . Dental implants, denture frames, surgical instruments, pacemaker boxes, crowns and bridges, and orthodontic wires, etc.