Classification of Nitinol wire EvansandDurning

1) In 1940, gold arch wire, cobalt-chromium alloy wire, stainless steel round wire

2) In 1960, martensitic stable alloys: mostly made of nickel-titanium alloys deformed in the martensitic state. This archwire is less rigid and can produce lighter corrective forces. There is no martensitic transformation induced by stress or temperature, and therefore does not exhibit memory effects and superelasticity.

3) In 1980, Chinese nickel-titanium alloy and Japanese nickel-titanium alloy archwires were all austenitic activated alloys: that is, they were in austenitic state in any state, and there was no horsepower caused by temperature whether they were placed inside or outside. Body mouth. The martensitic state can only be induced by stress and has superelasticity, but no shape memory function. This kind of arch wire has excellent resilience and low stiffness, which can produce weak correction force. The biggest feature is that the force it generates is constant from the initial start to the final stage. The effect is better when the teeth are not straight at the beginning of the treatment. The disadvantage is that it cannot be bent and formed at room temperature, and it is not easy to weld. If the wire is used as the main arch wire, it will often cause the undesired expansion or retraction of the dental arch, and it is difficult to establish a good premolar and molar alignment.

4) In 1990, martensitic activated nickel-titanium alloy: that is, the TTR is lower than the oral temperature or very close to the oral temperature, exists in a multi-component state at room temperature, and is easily deformed. When placed in the oral cavity, the stress-induced and room-temperature induced martensite transforms simultaneously into austenite, which is endowed with shape memory and superelasticity. It is easy to deform at room temperature (about 25°C) and below, but when it reaches a certain temperature (about 32°C), it will return to the original preformed shape, showing shape memory and superelasticity. Theat-activated nickel-titanium archwires can be easily shaped and placed in brackets when kept at or below room temperature. When activated by body heat in the mouth, it creates shape restoring forces, providing the strength needed in orthopedics. Due to the heat-activated nickel-titanium orthopedic wire's characteristic of "softening when it is cold, and more elastic when it is heated", patients can use cold or hot water in their mouths to change the correction force. It is convenient for the orthodontist to correct and reduce the discomfort during the initial correction.

5) Grading thermodynamics: Increased thermodynamics Nitinol: TTR temperature is higher than oral temperature, about 40°C. In this way, when the nickel-titanium arch wire is put into the oral cavity, it is still in a multi-component state, and the arch wire is relatively soft. When hot water is present, only austenite transformation occurs. Therefore, the orthodontic force is weak, and it can be used as the initial arch wire for adult patients and patients with periodontal disease. The copper-containing nickel-titanium wire produced by Omcro and the Japanese low-lag LH nickel-titanium arch wire have such properties.

You Might Also Like

Send Inquiry