How are titanium tubes manufactured?

In high-end fields such as aerospace, marine engineering, chemical engineering, and medical applications, titanium tubes have become key materials due to their high strength, low density, and excellent corrosion resistance. Their manufacturing process integrates precision metallurgy, hot working, and cold working technologies. Each step requires strict control over chemical composition and microstructure to ensure the performance stability of the final product. From raw material purification to finished product testing, the manufacturing process of titanium tubes is a model of modern industrial precision manufacturing.

How are titanium tubes manufactured?

The core of titanium tube manufacturing begins with the extreme purification of raw materials. A dual process of plasma cold bed melting (PAM) and electron beam melting (EBM) is employed, melting sponge titanium with alloying elements such as aluminum and vanadium at temperatures exceeding 3000℃ to form high-purity ingots. The impurity content can be controlled to within 0.005%. For example, the raw material purity of a certain aerospace-grade titanium alloy tube needs to reach 99.995% to ensure its stability under extreme temperatures ranging from -253℃ to 550℃. After ingot casting, tube blanks are prepared through drilling or skew rolling: drilling can achieve deep hole machining with an L/D ratio of up to 30:1, suitable for small-batch, high-precision tube blanks; skew rolling directly extrudes solid ingots into hollow blanks using a two- or three-roll skew rolling mill, reducing metal loss by 20%, but requiring subsequent cold rolling to refine wall thickness tolerances.

Hot working is a crucial step in titanium tube forming. The extrusion process uses a 3150-ton hydraulic press to extrude tube blanks heated below the β-phase transformation point. Combined with glass lubrication or copper cladding technology to reduce friction, ultra-long tubes with diameters ranging from 2mm to 300mm can be produced. For example, a certain nuclear power plant titanium tube uses a cladding extrusion process, controlling the wall thickness tolerance within ±0.05mm to meet high-pressure environment requirements. For large-diameter, thick-walled tubes, after skew rolling and piercing, multiple cold rolling passes and intermediate annealing are required: After billet preparation on the LG80 mill, the oxide layer is removed by pickling, followed by 6-8 passes of cold rolling to reduce the tube wall thickness to the design value. The deformation per pass is strictly controlled at 30%-50%, combined with a double annealing process of 850℃×2h/AC + 600℃×4h/AC, stabilizing the grain size at ASTM 8-10 grade and increasing the tensile strength to over 895MPa.

The manufacturing of welded titanium tubes takes a different approach, using titanium strip coils as raw material and forming them through longitudinal seam argon arc welding or spiral welding. Longitudinal seam welding uses ERTi-2 welding wire and argon gas with a purity ≥99.995% for protection. Low heat input welding (current ≤150A, speed ≥15cm/min) controls the heat-affected zone, maintaining the interpass temperature at ≤200℃, and achieving a weld strength of up to 95% of the base material. For example, a coastal power station successfully replaced stainless steel pipes with titanium welded pipes using a process of overall argon purging protection and delayed argon purging to below 300°C, extending the service life by three times. Spiral welded pipes, produced by spiral forming machines using titanium strips, have weld seams inspected by X-ray flaw detection, resulting in a defect rate of less than 0.1%, making them suitable for large-diameter pipelines.

Specialized processing technologies have opened up new dimensions for titanium pipe manufacturing. 3D printing additive manufacturing, using electron beam melting technology, directly forms topology-optimized heat dissipation tubes with a porosity of <0.5%, meeting the lightweight requirements of aerospace. Spin forming processes, using a four-hammer radial forging machine at a frequency of 120 times/minute, combined with a gradient cooling mandrel, can produce ultra-large diameter thin-walled tubes with a surface roughness Ra <0.8μm, increasing material utilization by 50%. A titanium tube for medical implants, using a composite process of spin forming and expansion jointing, controls the expansion degree to 1.2%-1.5%, avoiding cracking risks and exhibiting significantly better biocompatibility than traditional pipes.

As an innovative leader in titanium tube manufacturing, Haiboweler is committed to pushing technological boundaries. Its independently developed intelligent forging system integrates DEFORM software to simulate metal flow lines in real time, coupled with an online laser diameter gauge (accuracy 0.01mm) and an infrared thermal imager (±2℃), achieving 100% inspection coverage. From aero-engine compressor components to pressure tubes for deep-sea probes, Haiboweler titanium tubes redefine high-end titanium tube standards with their superior fatigue life (3-5 times longer than traditional processes) and extreme dimensional accuracy (wall thickness deviation ±0.05mm). Choosing Haiboweler means choosing a precision manufacturing partner that resonates with the future of industry.

You Might Also Like

Send Inquiry