Titanium rod and what does it do
introduce
Titanium alloy refers to a variety of alloy metals made of titanium and other metals. Titanium is an important structural metal developed in the 1950s. Titanium alloy has high strength, good corrosion resistance and high heat resistance. From the 1950s to the 1960s, high temperature titanium alloy for aero-engines and structural titanium alloy for aircraft engines were mainly developed. Titanium alloy has high strength and small density, good mechanical properties, good toughness and corrosion resistance. In addition, the process performance of titanium alloy is poor, the cutting and processing is difficult, in the thermal processing, it is very easy to absorb hydrogen, oxygen, nitrogen and carbon and other impurities.
What is a titanium alloy rod
Titanium rod is used in the production of titanium alloy and titanium metal, which has the characteristics of small density, high strength and good corrosion resistance. It is widely used in the aerospace industry to manufacture aircraft structural components and rocket nozzle, in the chemical industry as catalyst carrier and electrolyte purification device, and as heat exchanger and condenser materials in the mechanical industry.
Production of titanium alloy rods
Titanium alloy rod from titanium sponge, after a series of processing and production. The first step was the production of a titanium sponge that involves the chlorination of a rutile chloride ore derived from the beach sand. Coke and chlorine are mixed with rutile to produce titanium tetrachloride and, subsequently, it reacts with magnesium in a closed system. The vacuum distillation process is used to remove magnesium and magnesium to recycle it. In an electron beam furnace or a vacuum arc extinguishing furnace, the sponge melts with alloy elements such as aluminum, vanadium, tin, zirconium and molybdenum. It will produce re-cast electrodes that can be die-cast or melted by VAR into the slab-titanium alloy rods are obtained by further processing of the cast or forged slab.
Technical requirements for titanium alloy rods
1: The chemical composition of titanium and titanium alloy rod shall comply with the provisions of GB / T 3620.1. When the buyer retests, the allowable deviation of the chemical composition shall comply with the provisions of GB / T 3620.2.
2: The diameter or side length and the allowable deviation of its hot-processed bar shall comply with the provisions of Table 1.
3: After hot processing, the allowable deviation of the diameter deviation of the cold drawing rod shall conform to the provisions of Table 2.
4: After thermal processing, the irroundness of the vehicle (grinding) light bar shall not be greater than half of its size tolerance.
5: The length of indefinite ruler of processed bar is 300-6000mm, the length of annealed bar is 300-2000mm, and the length of fixed ruler or double ruler should be within the length range of indefinite bar. The allowable deviation of fixed rule length is + 20mm; the double rule length shall be included in the cut amount of the bar and 5mm. Each fixed rule or double length shall be indicated in the contract.
The use of the titanium alloy rods
Armoured
Titanium rods are very light and strong, which is why armor manufacturers use titanium rods to make them light and easy to wear down. Armor manufacturers use titanium rods in different types of applications to reduce weight and make the product more durable.
Aerospace industry
The rugged and durable look of titanium makes it a popular choice for sculpture and buildings. Titanium rods and sheets are specialized in skyscrapers. Titanium strips are used to support the buildings. Italy, for example, uses titanium to stabilize and support the Leaning Tower of Pisa.
Industry
Titanium industry applications are very large. Industrial manufacturing industry is the biggest consumer of titanium rods. Titanium's durability, light weight, corrosion and heat resistance, and cost-effectiveness make it a top industrial priority. A wide variety of titanium parts are used in the industry. Titanium is used in oil extraction, power plants and processing plants.
Sum up
In conclusion, titanium alloy rod, as a metal material with excellent properties, is widely used in many fields. Whether it is construction, mechanical manufacturing, medical treatment or other fields, titanium alloy rods can give full play to their unique advantages and bring more convenience and value to our lives.
