BT9 Titanium Plate
BT9 titanium plate is a high-strength, low-density titanium alloy plate.
Widely used in space shuttle structures , aviation parts , and marine industries.
Product Introduction
BT9 ( Ti-6.5Al-3.5Mo-1.5Zr-0.3Si ) is an α + β dual-phase titanium alloy with excellent hot strength properties, high room temperature strength and good hot workability. It can be used for a long time at 500℃ and is suitable for manufacturing aero-engine discs and blades, compressor discs, blades and drums. Due to the low density of titanium alloys and their relatively high strength from low temperature (-253°C) to medium and high temperatures (around 600°C), titanium alloys can replace traditional materials such as steel, aluminum alloys, and high temperatures. Haiboweier customizes BT9 titanium plates , titanium strips, pure titanium plates, titanium alloy plates, titanium cover plates, hot-rolled/cold-rolled titanium plates, medical titanium plates, titanium mesh, glasses titanium plates, titanium alloy thick plates, etc., you have any You can consult our customer service staff with any questions, and we will definitely give you a quick and satisfactory answer.
BT9 chemical composition list:
|
Element |
Fe |
C |
Si |
Mo |
N |
Zr |
Al |
H |
O |
Other single |
Total other |
More |
|
domain minimum |
- |
- |
0.2 |
2.8 |
- |
0.8 |
5.8 |
- |
- |
- |
- |
Ti margin |
|
maximum value |
0.25 |
0.08 |
0.35 |
3.8 |
0.05 |
2 |
7 |
0.012 |
0.15 |
0.1 |
0.4 |
Mechanical properties:
|
The tensile strength is |
1100MPa |
|
The yield strength is |
980MPa |
|
The elongation at break is greater than |
10% |
|
Titanium content |
87.6% |
|
Impurity content |
1.04% |
|
Material |
α+β titanium alloy |
Titanium plate production specifications:
Cold rolled plate (Y state) thickness δ (0.3mm-4.0mm) x W (400mm-2000mm) x L mm
Hot rolled plate (R state) thickness δ (4.0mm-30.0mm) x W(400mm-3000mm) x L9000mm
Titanium belt thickness δ (0.1mm-6.0mm) * width (100mm-1500mm) * length Lmm
BT9 titanium plates have many properties including:
BT9 board includes the following processes:
Raw material preparation: The raw materials are mainly titanium sponge and other alloy elements. The raw materials are melted in a vacuum furnace, and the molten titanium alloy is poured into a water-cooled copper mold to form a titanium ingot.
Hot rolling: Hot rolling titanium ingots at high temperatures into plate-shaped blanks.
Annealing: Anneal the plate-shaped blank to eliminate residual stress and improve the plasticity and toughness of the material.
Cold rolling: Cold rolling the hot-rolled plate blank to the specified thickness and size.
Heat treatment: Heat treatment is performed on the cold-rolled plate blank to improve the strength and toughness of the material.
Finishing: Inspect, cut, and deburr the heat-treated titanium plate to the required size and shape.
The production process can be summarized as follows:
1
Raw material preparation
2
smelting
3
ingot casting
4
hot rolling
5
annealing
6
cold rolling
7
heat treatment
8
finishing
The production process is as follows :
Titanium sponge - smelting - heating - forging - slab - grinding - hot rolling - annealing - grinding - cold rolling - annealing - pickling -
leveling - shearing - packaging.
our products
Shaanxi Haiboweier Metal Material Technology Co., Ltd. is a manufacturing enterprise specializing in the research, development, production and sales of rare metals such as titanium and titanium alloys, nickel and nickel alloys, zirconium and zirconium alloys. Products include titanium rods, titanium plates, forgings, wire materials, large-diameter titanium and titanium alloy tubes, titanium fasteners, titanium daily necessities and titanium alloy handicrafts, etc.
Hot Tags: bt9 titanium plate, China bt9 titanium plate manufacturers, suppliers, factory, Hot Rolled Titanium Plate, Cold Rolled Titanium Plate, Titanium Foil, Titanium Plate for Medical Use, ASTM B265 Titanium Plate, Titanium Ribbon
You Might Also Like
Send Inquiry
