
Gr12 Titanium Plate
We, Haiboweier Metals, are a Chinese manufacturer and supplier of titanium and titanium alloys, which are professional and technologically-based in processing and selling titanium and titanium alloys . We can provide you with high-quality raw material sponge titanium and various grades of rods, plates, pipe fittings, titanium plate Gr12 , wire titanium and various forgings for your choice.
Product Introduction
GR12 titanium plate is a lean titanium alloy with strong corrosion resistance and higher strength than commercial pure titanium grade 2 . Compared with other ordinary titanium, gr 12 has obvious improvement , mainly the crevice corrosion in salt water . Grade 12 titanium alloys also have better acid corrosion resistance than unalloyed metals indoors and at relatively high temperatures . In room and high temperature conditions than gr.2 or G r . 7 has higher strength , and if you use thinner slices during processing, you can save materials and costs.
Our gr12 titanium plate is often widely used in the manufacture of various equipment , our titanium rod, titanium plate, pipe and forged titanium welcome your consultation. And there is a certain amount of stock for you to choose from.
GR12 titanium plate specifications and sizes support drawing reservation customization:
Hot-rolled sheet: thickness T 4.5-36, width W650-2000, length L1000-45000
cold-rolled sheet: thickness T 0.8-4.5, width W650-1000, length L800-2200
GR12 is highly weldable, capable of increased strength at elevated temperatures, and has better crevice corrosion resistance, including excellent resistance to oxidizing to mildly reducing conditions, especially chlorides .
|
GR12 Chemical Analysis |
||||||||||||
|
chemical composition(%) |
||||||||||||
|
o |
N |
C |
h |
Fe |
AL |
V |
Ni |
Mo |
PD |
Others |
Residuals |
Ti |
|
0.25 |
0.03 |
0.08 |
0.015 |
0.30 |
|
|
0.6-0.9 |
0.2-0.4 |
|
|
0.4 |
Bal |
Mechanical properties of GR12 titanium plate
|
mechanical properties |
|||||
|
Yield Intensity (0.2% Offset)
|
maximum tensile strength |
Extended 0.2% Offset |
Curtailment of AERA |
||
|
the most |
the most |
% |
% |
||
|
KSI |
MPA |
KSI |
MPA |
18 |
/ |
|
50 |
345 |
70 |
483 |
||
of GR12 titanium plate :
1. Good ductility and low density.
2. Obvious corrosion resistance, high strength.
3. Under mild reducing conditions , the conditions range from oxidation to reduction.

Hot Tags: gr12 titanium plate, China gr12 titanium plate manufacturers, suppliers, factory, Titanium Strip, Titanium Ribbon, Titanium Alloy Plate, Gr7 Titanium Plate, ASTM B265 Titanium Plate, Titanium Plate for Medical Use
You Might Also Like
Send Inquiry







