Ti1533 Titanium Wire
Product name: Ti1533 titanium wire (titanium wire for glasses)
Material: α+β titanium alloy
American label number: GR1, GR2, GR3, GR5, GR7, GR12
State of titanium wire:Annealed state (M) Hot processed state (R) Cold processed state (Y) (annealed, ultrasonic flaw detection)
Product Introduction
Ti1533 titanium wire is a kind of titanium alloy eyeglass wire with high elasticity and high toughness, and its titanium content is as high as 90%. This titanium wire is an α+β titanium alloy with excellent elastic and mechanical properties. In addition, Ti1533 titanium wire is produced in Japan and is often used in the manufacture of spectacle frames and medical titanium.
Product name: Ti1533 titanium wire (titanium wire for glasses)
Material: α+β titanium alloy
American label number: GR1, GR2, GR3, GR5, GR7, GR12
State of titanium wire:Annealed state (M) Hot processed state (R) Cold processed state (Y) (annealed, ultrasonic flaw detection)
The performance of titanium material is:
Density: ρ=4.51g/cubic centimeter, melting point: 1668°C,
Thermal conductivity: λ=15.24W/(m.K), Tensile strength: σb=539MPa,
Elongation: δ=25%, Reduction of area: ψ=25%,
Elastic modulus: E=1.078×105MPa, hardness: HB195.
Chemical composition of Ti1533 titanium wire
| Grade | Main ingredient % | Impurities/%, not greater than | |||||||||
| TB5 | AL | Cr | V | Fe | C | h | o | other elements | |||
| 2.8~3.6 | 2.5~3.52.5~3.5 | 14.0~16.0 | 0.25 | 0.050.05 | 0.015 | 0.13 | single | sum | |||
| 0.1 | 0.3 | ||||||||||
our products
Q: How to identify titanium spectacle frames?
2. Observe the joint of the hinge: the pure titanium frame should not make direct contact between titanium and titanium at the hinge part, otherwise it is easy to wrinkle the joint and the opening and closing of the mirror legs are not smooth. Usually, two thin gaskets are inlaid on the hinge part of the pure titanium mirror to separate the upper and lower hinges. Therefore, checking whether there are gaskets at the hinge is also a good way to identify whether it is a pure titanium frame. Observing the hinge joint from the inside of the frame, you will find a small groove, which is specially designed to facilitate the removal of the gasket.
3. Observe the welding points of the nose pad stem and the nose pad box: the welding of pure titanium material is anaerobic butt welding, and the weld marks are in the shape of "steps"; the welding of alloy materials is spot welding, and the weld marks are in the shape of "slopes". It is one of the effective methods to distinguish between titanium frame and non-titanium frame, all-titanium frame and non-all-titanium frame.
4. Use a magnet for magnetic reaction: Loosen the hinge of the frame as much as possible, and use a magnet to attract it in a free state. If the mirror legs shake under the attraction of the magnet, it means that the frame is not made of pure titanium, otherwise it means that the mirror The frame is probably a titanium frame.
Q: Why use titanium material to make glasses?
A:Titanium is a lightweight yet strong metal for close-up and durable eyewear. It can provide the wearer with a more comfortable wearing experience while protecting the glasses from damage.
Its antioxidants are important against water, sweat and chemicals, meaning titanium glasses are less susceptible to damage from environmental elements and maintain their appearance and performance.
Due to its biocompatibility it rarely causes skin allergies or sensitive reactions. This makes titanium eyewear wearers less likely to develop skin allergies
Hot Tags: ti1533 titanium wire, China ti1533 titanium wire manufacturers, suppliers, factory, GR5 Titanium Wire, Titanium Straight Wire, Titanium Welding Wire, Ti6AL4V ELI Titanium Wire, Titanium Alloy Wire, Medical Titanium Wire
You Might Also Like
Send Inquiry
