Products

Home / Products/ Titanium Rod / Pure Titanium Bar

Titanium Rod Grade4

Titanium grade 4 is a titanium-aluminum binary alloy. This alloy exhibits an α-type single-phase state at room temperature and service temperature. The room temperature strength is generally lower than that of β'> type and α+β type titanium alloys (but higher than that of industrial titanium alloys). Pure titanium), but its strength and creep strength at high temperatures (500-600°C) are the highest among the three types of titanium alloys , and its structure is stable and can be used as structural materials in the medium-strength range.

Send Inquiry

Product Introduction

Commercial grade 4 pure titanium can be used for a variety of welding applications and offers outstanding stamping performance. It performs well when welding, and the welded joint can achieve 90% of the base metal's strength. It has good machining qualities and is simple to cut with saws and grinders. It is used for parts with temperatures below 350°C, little stress, and parts stamped into a variety of intricate shapes because of its exceptional corrosion resistance. aircraft frames, skins, engine parts, beams, etc.; chemical heat exchangers, pump bodies, distillation towers; seawater desalination systems; thermal power station condensers; marine seawater-corroded piping systems, valves, and pumps; etc. In addition to offering Grade 4 titanium rods, we are also capable of producing and processing other grades.

Physical performance analysis table:

Temperature , °F	32-212		32-600		32-1000		32-1200		32-1500
Coefficient of thermal expansion , in/in°F x 10-6	4.8		5.2		5.4		5.6		5.6
tensile strength , ksi							80
0.2% yield strength , ksi							70-95
Elongation , min in 2 inch, %							15
Temperature , F°		200		400			600	800
tensile strength , ksi		78		53			41	31
0.2% yield strength , ksi		61		37			25	twenty one
Elongation , %		twenty three		25			28	26
Theoretical thickness , in		>0.070				<0.070≤0.185
Bend , 105° bend		5				6

Chemical composition list of titanium rod Grade4

Chemical composition of Grade4 titanium
Trademark	Impurities are not greater than
Grade4	Titanium (Ti)	Iron (Fe)	Carbon (C)	Nitrogen (N)	Hydrogen (H)	Oxygen (O)	Aluminum (Al)	Vanadium (V)
Grade4	margin	≤0.30	≤0.08,	≤0.05	≤0.015	≤0.20	5.5～6.75	3.5～4.5

The superior characteristics of titanium rod Grade4:

Corrosion resistance; high temperature resistance

High strength; biocompatibility

Easy to process; high specific steel strength

Good weldability,Good processing performance

Grade4 titanium can be processed:

Pipes and Pipe fittings

Rods and plates

Forged and cast parts

Titanium wire and

Wire and welding wire

Our products are:

Titanium pipes: various grades of pure titanium pipes and titanium alloy pipes, seamless titanium pipes, titanium coiled pipes, titanium welded pipes, round/square pipes, capillary tubes, extruded pipes and titanium pipe fittings, etc. Special specifications can be customized!

Titanium rods include: pure titanium rods, titanium alloy rods, ultrasonic titanium rods, medical titanium rods, chemical titanium rods, electrode titanium rods, polished rods, polished rods, rolled and forged titanium rods, titanium square plates and hollow titanium rods Sticks, etc. Special specifications can be customized!

The plates include: commercial pure titanium plate, alloy titanium plate, titanium foil, cold-rolled titanium strip, hot-rolled titanium plate, glasses titanium plate, electrolytic titanium plate, medical titanium plate, anode titanium plate, etc. Special specifications can be customized!

There are also diversified titanium products such as titanium wire, titanium flange, titanium ring, titanium fasteners, etc. We welcome your consultation and cooperation!