GR6 Titanium Rod
Name: GR6 titanium rod
Material: Grade 6 titanium alloy
Brand: GR6 (Ti-5AI-2.5Sn)
Specification size: standard diameter range is 0.5mm to 300mm
Whole sale, retail and customization are all available.
Type : α type titanium alloy
Titanium content percentage: 99.99 (%)
Product Introduction
The material of GR6 titanium rod is a medium-strength α-type titanium alloy that cannot be strengthened by heat treatment. It is generally used in the annealed state and has good fracture toughness properties at high temperatures and room temperature. GR6 gold has good welding properties and can be used in the welding process of metal electrodes and tungsten electrodes under inert gas. It can be used to manufacture parts such as receiver casings and wall panels. The alloy's long-term working temperature can reach 500°C, and its short-term working temperature can reach 800°C. The Ti-5AI-2.5SnELI alloy with low interstitial impurity elements is suitable for use at low temperatures. The products produced include bars, cakes, plates and forgings. Titanium alloy GR6 has poor stamping performance but good thermoplasticity. Good corrosion resistance and good high temperature thermal stability.
Material grade:
|
Material grade |
USA |
Russia |
U.K. |
|
GR6 |
Ti-5Al-2.5Sn |
BT5-1 |
IMI317 |
Mechanical properties :
|
density |
4.42g/ cubic centimeter |
|
room temperature elastic modulus |
113GPa |
|
Elastic Modulus |
E=1.078 × 105MPa |
|
hardness |
277~286HB |
|
The melting point is |
172 |
|
rate of reduction in area |
ψ =25% |
|
Thermal Conductivity |
λ =15.24W/(mK) |
|
Elongation |
δ =25% |
|
tensile strength |
σ b=539MPa |
GR6 chemical composition :
|
GR6 chemical composition |
|||||
|
element |
Titanium (Ti) |
Aluminum(AI) |
Tin(Sn) |
Iron(Fe) |
other elements |
|
mass fraction % |
margin |
4.0-6.0 |
2.0-3.0 |
≤0.50 |
Single 0.10 |
|
element |
Carbon(C) |
Nitrogen(N) |
Hydrogen(H) |
Oxygen(O) |
other elements |
|
mass fraction % |
≤0.08 |
≤0.05 |
≤0.015 |
≤0.20 |
Total 0.40 |
The following are some common implementation standards for GR6 rods:
GR6 titanium rods are usually formulated based on international or national standards. The most common standards are ASTM (American Society for Testing and Materials) and AMS (Aerospace Materials Specification).
ASTM Standards: ASTM International publishes several standards related to titanium alloys, including specifications for titanium rods. ASTM standards for GR6 rods include ASTM B348 ("Standard Specification for Titanium and Titanium Alloy Bars and Billets") and ASTM B381 ("Standard Specification for Titanium and Titanium Alloy Forgings"). These standards stipulate the chemical composition, mechanical properties, dimensions and other technical requirements for this brand of titanium rods.
AMS standard: AMS is a standard issued by the U.S. Defense Standardization Program (Defense Standardization Program). AMS standards generally apply to materials and components in the aerospace and defense sectors. AMS standards for GR6 alloy titanium rods may include AMS 4925 ("Titanium alloy rods, wires"), forgings, rings 4.0Al-4.0V, solid solution and precipitation heat treatment"), etc.
The following are some common implementation standards for GR6 rods:
Smelting
forging
rolling
drawing
The required products can be customized according to the customer's specific application requirements.
Different finishes available:
1
polishing
2
sandblasting
3
satin
Rods are available in straight and curved shapes depending on the customer's specific needs.
GR6 has many features including:
GR6 titanium rod has a wide range of applications due to its excellent performance.
product picture
Hot Tags: gr6 titanium rod, China gr6 titanium rod manufacturers, suppliers, factory, ASTMF67 Titanium Rod, Titanium Hollow Rod, Forged Titanium Bar, Gr23 Titanium Bar, Rolled Titanium Bar, Titanium Alloy Rod
You Might Also Like
Send Inquiry
