Grade 2 Titanium Tee
After-sales Titanium tee tee is also called pipe fitting tee or tee pipe fitting, tee joint, etc. It is mainly used to change the direction of the fluid. It is used in the main... There are equal-diameter pipe openings and different-diameter pipe openings, which are used at the convergence of...
Product Introduction
Product introduction
Titanium tee is also called pipe fitting tee or tee pipe fitting, tee joint, etc. It is mainly used to change the direction of the fluid. It is used in the main... There are equal-diameter pipe openings and different-diameter pipe openings, which are used at the convergence of three identical or different pipelines.
Chinese name: Grade 2 titanium tee
Level: GR2
Standard: ASME B16.9.
Material classification: titanium, nickel, pickaxe
Purpose: pipe connectors
Type: Equal diameter tee
Connection method: welding
Classification of titanium tees
1. According to the pipe diameter, it is divided into: equal diameter titanium tee and different diameter titanium tee
2. According to the welding process: seamless or seamed
Specification
|
QUAL TITANIUM TEES |
|
|
type
|
seamless or welded |
|
standards |
ASTM B363 – ASME SB363 |
|
dimensions |
external diameter |
|
|
|
Seamless extrusion or butt welding elbow, polishing, lathe processing, pickling, sand rolling.
Cutting: First, according to the length of the main pipe and branch pipe of the tee to be made, cut a section of titanium pipe according to the sum of the two lengths.
Filling: Pour the prepared paste filler into the titanium tube, making sure there is no gap between the filler and the titanium tube, and filling the entire titanium tube.
Fix the titanium tube: first place the two vertebral body molds on the hydraulic press, and then fix the titanium tube to the center of the vertebral body mold. The two ends of the vertebral body mold are one section higher than the two ends of the titanium tube; then merge the two molded vertebral body molds. Okay, put down the ring mold that has been hung on the hydraulic press so that the ring mold can be placed on the vertebral body mold and the vertebral body mold can be fixed.
Suppression: First put the prepared core into the lower and upper ends of the vertebral body mold, and use a hydraulic press to repeatedly press the core at the upper end of the vertebral body mold until the core completely enters the vertebral body mold and is level with the top and bottom of the vertebral body mold. allow.
Cutting: Disassemble the vertebral mold, take out the pressed tee, pour out the filler and use a cutting machine to cut the head of the tee branch.
Branch pipe incision processing: Open the incision so that the branch pipe port meets the required standards.
1. Excellent corrosion resistance in many media
2. Low density, high strength and low equipment weight
3. The surface is smooth and free of dirt, and the dirt coefficient is greatly reduced
use:
Widely used in petroleum, chemical industry, electric power, metallurgy, chemical fiber, food, pharmaceutical, chlor-alkali, vacuum salt production, fine chemicals, bioengineering, seawater desalination, marine engineering and other industries.
Product introduction
Hot Tags: grade 2 titanium tee, China grade 2 titanium tee manufacturers, suppliers, factory
You Might Also Like
Send Inquiry
