High Strength Titanium Rod GR.5

High-strength titanium rod GR.5 is a high-strength, high-corrosion-resistant material with good wear resistance, impact resistance, high specific strength, low density, high temperature resistance and biocompatibility. Widely used in various mechanical equipment, aerospace, and medical fields. GR.5Ti6al4v Titanium rods are manufactured using modern heat treatment technology, which can maintain stable performance under high strength and high temperatures, and at the same time have good processability and can be easily processed into various shapes and sizes. We can provide titanium rods of various shapes and sizes that meet the requirements of our customers according to their different needs.

Titanium is malleable. The elongation of high-purity titanium can reach 50-60%, and the shrinkage of area can reach 70-80%, but the shrinkage strength (ie, the force generated when shrinking) is low.

Impurities in titanium affect its mechanical properties. In particular, interstitial impurities (oxygen, nitrogen, carbon) can greatly increase the strength of titanium while significantly reducing its plasticity. Titanium's good mechanical properties are achieved by strictly controlling the impurity content and adding other alloying elements.

Titanium has strong corrosion resistance in many media, especially neutral and oxidizing media. It can also be used for some dilute reducing acids, such as various acids from normal temperature to boiling point. The concentration of nitric acid. It has good corrosion resistance to most alkali solutions, such as saturated solutions of barium hydroxide, calcium hydroxide, and magnesium hydroxide at room temperature, but cannot be used in boiling sodium hydroxide solutions. Titanium is not corroded at all in seawater and is resistant to corrosion in most organic acids (except formic acid and oxalic acid). Corrosion resistance in sodium chloride solutions increases with increasing solution pH.

(1) Small deformation coefficient: The distinctive feature of titanium alloy cutting processing is the small deformation coefficient. The deformation coefficient is less than or close to 1. The sliding friction distance of chips on the rake face is greatly increased, accelerating tool wear.

(2) High cutting temperature: The thermal conductivity of titanium alloy is small, the contact length between the chip and the rake face is extremely short, and the heat generated during cutting is not easily transferred. Come out, concentrated in the cutting area and a smaller range close to the cutting edge, the cutting temperature is very high. Under the same cutting conditions, the cutting temperature can be more than twice as high as when cutting 45 steel.

 

(3) Large cutting force per unit area: the main cutting force is about 20% smaller than when cutting steel. Since the contact length between the chip and the rake face is extremely short, the cutting force per unit contact area is greatly increased, which can easily cause edge chipping.

(4) Cold work hardening phenomenon is serious: Due to the high chemical activity of titanium, at higher cutting temperatures, it can easily absorb oxygen and nitrogen in the air to form a hard and brittle outer skin; at the same time, plastic deformation during the cutting process It can also cause surface hardening. .

(5) Tools are easy to wear: After the blank is processed by stamping, forging, hot rolling, etc., a hard and brittle uneven skin is formed, which can easily cause chipping and make the removal of the hard skin a difficult process. In titanium alloy processing.

GR.5 high-strength titanium rods have a wide range of applications, including aerospace, machinery manufacturing, medical and other fields. In the field of aerospace, it is used to manufacture aircraft, rockets, missiles and other components to increase load capacity and reduce weight; in the field of machinery manufacturing, the material can be used to manufacture various mechanical parts, body frames, bearings, gears, etc. , used to improve the reliability and performance of equipment; in the medical field, titanium rods can be used to manufacture artificial joints, dental implants, etc., which have good biocompatibility and are not easily resisted by the human body.

 

Hot Tags: high strength titanium rod gr.5, China high strength titanium rod gr.5 manufacturers, suppliers, factory, Titanium Bar For Industry, Titanium Alloy Bar, Titanium Alloy Rod, Titanium Square Bar, Titanium Rods for Aerospace, Titanium Round Bar